This is the fourth set of programs I have written for the launch in August. This set of programs will use what my dad referred to as a "forward checking system," which may be what it is called, i haven't really looked into what other people have done with it. What this set will do for the data checking portion is send the same data from the balloon twice, and on the ground the data will be compared and checked that way. If both sets are the same, a "1" will be sent back up to the balloon, signaling that the next set of data should be collected. If the two transmissions are different, then a "0" will be transmitted up to the balloon signalling that the data was corrupted and needs to be sent again.
I haven't really looked into what to do about resetting the system every fixed amount of time.
I have been testing the controllers I have, and I think I fixed the one that was faulty, but I don't know what I did.
I haven't really looked into what to do about resetting the system every fixed amount of time.
I have been testing the controllers I have, and I think I fixed the one that was faulty, but I don't know what I did.
| aug21balloon4.bs2 |
| aug21ground4.bs2 |
RSS Feed
